call for a free estimate
Quickly and Effectively Lift Sunken Concrete with PolyLevel®
Advantages of PolyLevel®
How PolyLevel® Works
The causes of concrete settlement and sinking are the same whether it’s a driveway, walkway, patio, garage floor, or pool deck. As soil underneath a concrete slab shrinks, settles or washes away, this leaves empty space, or voids, beneath the slab. With the soil no longer supporting the slab, the concrete will sink, creating an uneven surface.
PolyLevel uses a high-density polyurethane foam to fill voids and stabilize and lift sinking concrete slabs. The expanding properties of the two-part urethane formula allows for accurate leveling of the slab. The result is a waterproof repair that’s much more permanent than mudjacking and other common concrete repair methods.
Small 5/8” holes are strategically drilled in the slab.
Injection ports are installed.
Polyurethane foam is injected beneath the concrete to fill voids and raise the slab.
Holes and control joints are sealed.
DrivewaysIf you have a driveway that’s sunken or uneven, replacing it might not be the most cost-effective option. We can use PolyLevel to raise the concrete, creating an even surface and preventing further sinking and cracking. Our driveway leveling process can eliminate unsafe conditions and improve the curb appeal of your home. The life of your driveway will also be extended for years without the need for replacement.
Sidewalks & WalkwaysAn uneven sidewalk not only looks bad, but it creates a tripping hazard. If the concrete slab is still intact, don’t waste your money on replacing the concrete. With PolyLevel, we can raise your sunken sidewalk, allowing you to walk on the sidewalk within an hour. Our sidewalk leveling process saves you time and money.
Patios, Porches & LandingsYou shouldn’t have to worry about tripping on uneven concrete when relaxing on your patio. You might also notice your table and chairs wobbling because of uneven concrete. Concrete leveling can eliminate these issues and provide a safe, even surface.
Concrete Floors & Slab FoundationsIf your home has sloped floors, cracks in floor tiles, gaps below baseboards, gaps at the tops of walls or sticking doors, you might have a concrete settlement problem. Our use of polyurethane foam for concrete floor leveling is a long-lasting alternative to self-leveling treatments.
Concrete Pool DecksHas your concrete pool deck seen better days? Worried about the cracked, uneven deck causing tripping hazards? PolyLevel can raise your concrete pool deck back to its original position and help restore your backyard pool area into the oasis it once was.
Pool Deck Repair
Causes of a sinking concrete pool deck
Many concrete pool decks are prone to settling because of the pool construction process. The backfill soil that’s added around the pool excavation will not be as dense or well-compacted as the undisturbed soil. When a heavy concrete slab is poured around the pool, loose soil will often compress under the slab’s weight, causing sections of the concrete to sink or settle.
Concrete pool deck restoration with PolyLevel®
Some contractors still use the old-school repair for settled concrete. They use heavy equipment to demolish the cracked, settled sections of concrete around your swimming pool, and pour a new concrete deck. With concrete replacement you often get a damaged yard and a pool that’s off limits until the new concrete hardens and cures. Our concrete leveling method saves you time and money, and won’t disrupt your landscaping.
Injecting PolyLevel expanding foam beneath a settled pool deck will raise the concrete back to proper level and also strengthen the soil so that the problem won’t recur.
How PolyLevel® works to repair your settled pool deck
PolyLevel is a high-density expanding foam that our technicians can use to raise settled concrete. The two-part polyurethane foam mixture is injected through small holes drilled in the settled concrete. Our installers are trained to control the injection process so that just enough foam is used to re-level the concrete deck. Because the foam’s expanding action fills voids in loose soil, this concrete leveling technique improves the soil’s stability and load-bearing characteristics. You can feel confident that settlement won’t occur again.
Get a quote to eliminate swimming pool trip hazards today
Worried that your sinking swimming pool deck might be a tripping hazard? Strive Concrete Solutions has successfully raised and restored hundreds of pool decks in Dallas, Denton, Lewisville, Plano, Allen, Flower Mound, Highland Village, Southlake, Grapevine, Carrollton and throughout Texas. Contact us today! We can answer any questions you have about concrete repair and provide you with a free estimate to repair your pool surround.
Traditional Concrete Lifting vs PolyLevel®
|PolyLevel Foam Injection||Mudjacking/Slabjacking|
|Cure Time||15 minutes||24 hours or more|
|Material Weight||2 lbs per cubic foot||100 lbs per cubic foot|
|Hole Size||5/8" (size of a penny)||1" (size of a quarter)|
Commercial PolyLevel Concrete Leveling Near Dallas, Denton, Lewisville, Plano, Allen
Strive Concrete Solutions offers a proven solution to stabilize and level uneven concrete slabs, such as sidewalks, driveways, roadways and warehouse floors. With multiple formulas available, PolyLevel® can fit the needs of your commercial, industrial or municipal job, large or small.
Supportworks’ PolyLevel System is designed to work under the most extreme conditions. PolyLevel uses a two-part urethane polymer that expands into high-density foam to fill voids, lift and stabilize concrete and solve a wide range of geotechnical and structural applications.
Strive Concrete Solutions is your professional PolyLevel contractor in Greater Dallas, specializing in concrete leveling and repair. Call us at 1-855-215-8747 or click below to request a consultation to discuss the scope of your project.
PolyLevel® works for a wide range of applications:We can select the right PolyLevel® formula for your specific application, whether it’s concrete leveling, void filling, soil stabilization or joint stabilization. The PolyLevel® process and steps for installing PolyLevel® are the same for both commercial and residential applications.
Advantages of PolyLevel® for commercial use
PolyLevel® is a state-of-the-art alternative to mudjacking, re-leveling grout or concrete replacement. The polyurethane foam system offers numerous features and benefits:
Lightweight – Our polyurethane foam weighs approximately 4-6 pounds per cubic foot when installed, in comparison to traditional mortar-based material which weighs 120 pounds per cubic foot.
High capacity – Lifting action is a result of the expansion of the polymer, allowing for lifting of a much higher load than traditional mudjacking, which relies on hydraulic pressure being contained under a slab.
Accurate lift – Calculated reaction time of the expanding polyurethane foam allows for targeted, precise lifting of the slab.
Waterproof – Polyurethane formula is fully waterproof, so it won’t wash out, won’t be impacted by freeze/thaw cycles and can be used to under-seal slabs and stop a variety of infrastructure leaks.
Non-invasive – PolyLevel equipment can be used in extremely limited access areas and won’t disturb lawn or landscape.
Quick cure time – Within just 15 minutes after injection, the concrete slab is ready for heavy loading; compared to conventional mudjacking which takes several days to cure.
Environmentally-friendly – With PolyLevel there’s no need to demolish the concrete and transport the waste to a landfill.
Get an estimate on commercial PolyLevel installation
Strive Concrete Solutions offers commercial concrete leveling and PolyLevel installation in Dallas, Denton, Lewisville, Plano, Allen and all of Greater Dallas. Contact us today to schedule an on-site consultation and learn how PolyLevel can solve your concrete settlement problems and a wide range of other structural issues. Get an estimate for your commercial project today – call 1-855-215-8747. Looking for a price? Get a no cost, no obligation free estimate.